How to Measure for A New Kitchen Sink In 6 Easy Steps (Plus 4 Helpful Tips)

As an Amazon Associate I earn from qualifying purchases. Learn more.

Kitchen sinks come in many different sizes. They range from small to large. The size of your sink depends on what you plan to do with it.

For example, if you plan to wash dishes, you should choose a smaller sink. However, if you plan to clean up spills or scrub pots and pans, you should go for a larger sink.

There are two ways to determine the size of your sink:

  1. First, measure your current sink and compare it to the below measurements.
  2. Look online for the dimensions of your sink.

In this guide, we’ll discuss how to measure your existing sink to get the dimensions recorded right, so you can shop efficiently.

Six Easy Steps To Measure For A Sink

how to measure sink

To measure your existing sink, follow these steps:

Step 1: Place a measuring tape across the top edge of your sink.

Make sure the tape is parallel to the bottom edge of the sink.

Step 2: Mark the measurement where the tape meets the bottom edge of the countertop.

This is the height of your sink.

Step 3: Measure down from the top edge of the sink to the mark made in step 2.

This is the width of your sink.

Tip: To ensure accuracy, use a ruler to measure the distance between the marks.

Step 4: Add the depth of your sink to the width of your sink to find its total volume.

Example: A 10-inch deep sink has a total volume of 10 x 10 x 10 inches 1000 cubic inches.

Step 5: Multiply the total volume of your sink by 0.75.

This is the approximate cubic feet of space needed for your new sink.

Example: If your sink is 10 inches deep and has a total volume of 1000 cubic inches, multiply 1000 by 0.75 to get 750 cubic inches.

Step 6: Compare to measurements provided by your sink manufacturer.

For example, if your sink manufacturer provides a minimum dimension of 40 inches and a maximum dimension of 48 inches, you need to purchase a sink that fits within those parameters.

Note: Some manufacturers provide additional information about their products, such as the material used to construct the sink.

Helpful Tips

  1. Be sure to measure the inside dimensions of your sink before purchasing one.
  2. It’s essential to know the exact dimensions of your sink so that you don’t buy a sink that doesn’t fit.
  3. Don’t forget to add the depth of your sink when calculating the total volume of your new sink.
  4. Check the manufacturer’s website for additional details about the materials used to construct the sink and any special features included with the sink.

How to Calculate the Volume of A Kitchen Sink

how to measure sink

To calculate the volume of the kitchen sink, follow these steps.

Step 1: Determine the length of your sink.

Most manufacturers provide the length of their sinks in either inches or centimeters.

Step 2: Divide the length of your new kitchen sink by the depth of your sink.

For example, if the size of your new bathroom sink is 30 inches and the depth is 10 inches, divide 30 by 10 to get 3.0.

Step 3: Multiply the result from step 2 by 0.75 to obtain an estimated volume.

Example: A 30-inch-long sink has a volume of 30 x 0.75 22.50 cubic inches.

Step 4: Compare the volume calculated in step 3 to the measurements provided by the manufacturer.

If the manufacturer offers a minimum dimension and a maximum dimension, then you can use those numbers to determine whether the sink you want will fit into your home.

Example: If the manufacturer provides a maximum dimension of 48 inches and a minimum of 40 inches, you need to make sure that the sink you choose will not exceed the 48-inch maximum dimension.

If the sink you want exceeds the maximum dimension, then it may be too large for your home. You should consider another option instead.

Step 5: Compare the volume calculated in step 4 to the measurement provided by the manufacturer.

Example: If you consider a 36-inch-deep sink, multiply 36 by 0.75 to arrive at 27.00 cubic inches.

Compare this value to the measurements provided by the manufacturer. If the manufacturer specifies a minimum dimension of 42 inches and a maximum dimension between 44 and 46 inches, then you’re good to go. 


Q: How do I find out the volume of my existing sink?

A: To find out the volume of your current sink, simply measure its width, height, and depth.

Q: What are the different types of kitchen sinks available?

A: There are two main types of kitchen sinks: single-bowl and double-bowl. Single-bowl sinks have a single drain hole located on the bottom of the sink. Double-bowl sinks have two holes, one on each side of the sink.

Q: Why does my sink look smaller than what was measured?

A: The sink might appear smaller because there is less space around the sink due to cabinet doors.

Q: Where can I purchase a replacement sink?

A: Your local hardware store or plumbing supply company should have a selection of sinks.

Q: Do I need to buy a new faucet when replacing a sink?

A: No, most faucets work fine with a new sink. However, some older faucets require a wrench to remove them.

Q: Can I install a new sink myself?

A: Yes, but you’ll need help. For safety reasons, you should never attempt to replace a sink without professional assistance.

Q: Is it possible to install a new sink using only tools found in any toolbox?

A: It’s certainly possible, but you’ll need a few special tools as well. Here are some tips to keep in mind when installing a new sink yourself:

1) Use a level to ensure that the sink is plumbed correctly.

2) Make sure that all pipes are properly connected before starting the installation process.

3) Be careful while working near electrical outlets and water sources.

Q: Are there any other things to know about installing a new sink?

A: Installing a new sink requires a lot of time and effort. Make sure that you plan ahead so that you don’t run into problems during the installation process.

Leave a Comment

This site uses Akismet to reduce spam. Learn how your comment data is processed.